Home  |  About Us  |  Contact Us  |  Products Catalogue  |  Safety  |  News  |  Demos & Photos

SAND CLEAN OUT PKG


 
Typical surface sand clean outTM equipment consists of the following equipment, which must have a working pressure equal to or greater than the bottom hole pressure:

•        an emergency shutdown (ESD) valve

•        several slimhole valves

•        tubing swivel

•        15 m by 50 mm double - or triple - braided hose

•        Chiksan or heavy-walled elbow.

 

All of the surface equipment used for a sand clean outTM must be dedicated solely for that purpose. This equipment must be an addition to normal rig inventory. The valves must be lubricated and pressure tested after each use. When leaks are detected, they must be sent for repair and recertification to OEM specifications.